Programmable DC Power Supply HY3030EP 0-30V 0-30A With Automatic Reverse Polarity

$800.00 $369.95

Manufacturer: Volteq

Stock Level: 4

Product Information



Volteq HY3030EP is basically the same as HY3030EX, except that it comes with built-in control and programming with Arduino Micro. If you are familiar with Arduino, writing software code to control this power supply and run automatic testing is a piece of cake. We supply a sample code to let you set and read voltage and current output via USB, you can also use our softare to calibrate the power supply, generate a multi-step linear ramp, and run a fixed amp-minute operation, etc. This power supply is ideally suited for automatic testing, battery charging/maintenance, DC/servo motors, anodizing and plating applications. Currently the following I/O are used, leaving the rest for other application/controls you may have: 

A6 - Voltage Read
A7 - Current Read
D10 - PWM for Current Set
D9 - PWM for Voltage Set
D2 - Output On/Off


This model is equiped with the capability to switch the output polarity automatically, with customizable duration for forward and backward polarity, making it ideal for electrocoagulation and electroplating applications.


Features & Specifications:

  • Control: front panel or via Arduino Nano using USB
  • Two level of control for both current and voltage outputs: coarse and fine for ease of use
  • Outputs: 0-30 V and 0-30 A
  • Protection: over-voltage and reverse-voltage protection
  • Input voltage: 110V AC 
  • Voltage Stabilization: <=0.2%
  • Current Stabilization: <=0.5%
  • Load Regulation: <=0.3%
  • Ripple noise: CV <= 1%
  • LCD reading accuracy: +/-1% +/-1 digit
  • Environment: 0-40C, relative humidity < 90%
  • Size: 12" x 10" x 6"
  • Weight: 16 lbs
  • Warranty: 1 year
Programmable Power Supply HY3030EP
Programmable DC Power Supply HY3030EP

Product Code: HY3030EP_RS

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

Mobile Site

Copyright Acifica, Inc.  2022. All rights reserved.